#1
|
||||
|
||||
Clear Plastic Fin Stock
Carl,
Have you ever tried to source clear plastic fin stock similar to what was provided in the Thor and Gemini-Titan kits? It would be really nice to be able to order laser cut pieces for those kits (and others) out of a suitable clear plastic. Steve |
#2
|
||||
|
||||
I have found it, but I did not order any. If there is enough interest, I will pursue it after the holidays. I was waiting for Ray to do the GT3 and see how he did it and if we could help.
__________________
Carl McLawhorn NAR#4717 L2 semroc.com |
#3
|
||||
|
||||
Happy New Year!
Yes, I would be very interested in the clear fin stock and the pre-cut fins, too. BTW, Carl, nice new banner on the home page! MarkII
__________________
Mark S. Kulka NAR #86134 L1,_ASTRE #471_Adirondack Mountains, NY
Opinions Unfettered by Logic • Advice Unsullied by Erudition • Rocketry Without Pity
|
#4
|
||||
|
||||
Found my Estes clear plastic fin stock. Not quite crystal clear after all these years. I will try to scan the instuctions in the near future. Right now the computer and all-in-one printer/scanner/copier are at odds. Santa did not bring the new computer - yet.
Chas |
#5
|
||||
|
||||
Here is the scan of the instructions. The now-yellowed piece of plastic is 3" x 9". I did not measure the thickness, but it looks like they offered 0.02" stock and 0.04" stock.
Chas |
Thread Tools | Search this Thread |
Display Modes | |
|
|