#1
|
|||
|
|||
Vintage Balsa Sealer
Here are some of the old balsa sealers I have, the only one I thing is missing is the Centuri Fillercote.
|
#2
|
||||
|
||||
Amazing none have dried out by now...
Bill
__________________
It is well past time to Drill, Baby, Drill! If your June, July, August and September was like this, you might just hate summer too... Please unload your question before you ask it unless you have a concealed harry permit. : countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ; Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding... |
#3
|
||||
|
||||
I have pint and quart cans of Aero Gloss from the 60's that are older than I am that are full, and totally good for use. The cans of Sanding Sealer and Balsa Fillercoat I use most are from the late 70's/early 80's.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC ! |
#4
|
|||
|
|||
I found over the years old Pactra dope did not ply well with the newer Midwest Pactra Dope. The formula has changed several times over the years.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|