#1
|
||||
|
||||
Laser Cutter Recommendations
Hi All, many of you have used or own laser cutters, so any advice or suggestions for a dependable desktop laser cutter would be much appreciated. (Not interested in a CNC machine).
It'll be used primarily to cut 1/16" - 1/4" balsa for gliders. Not sure if it's okay to also laser-cut hollow and solid carbon rods with a thickness of 1/8" but if heating doesn't produce any problems like toxic fumes, I'd also be using it for that purpose too. Is 40W overkill or is it in the ballpark? A laser cutter with a pass through would be ideal, but if that jacks the price too much, an effective cutting area of 16" long x 3" - 4" wide should handle most if not all of my needs. Ease of adjustment, whether the manufacturer includes laser cutter control software (not design software, I already have Adobe Illustrator), any maintenance issues, decent customer service and life of the laser tube would also be concerns. I won't need to use it continuously to make kits or anything, just on an as-needed hobby basis for my own projects. I'm looking to get something that doesn't require water-cooling, just air-cooling, and preferably something US-made and serviced. Recommendations?
__________________
“I would like to die on Mars. Just not on impact”. — Elon Musk “Minds are like parachutes--they only function when open”. —Thomas Dewar |
#2
|
||||
|
||||
To be honest at this juncture, I could see getting a laser cutter too; well before a 3-D printer (though I know you are not drawing comparisons here). Lots of ‘news’ about 3-D printers these days, but I still have not seen the output from one (well, one that most hobbiests could afford) that really truly is ready for prime time.
A laser cutter however seems like something many of us could use and use effectively and productively. So, yes, I too would be interested in hearing any recommendations anyone has relative to the general specs outlined above. Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#3
|
||||
|
||||
My experience with laser cutting almost 10 years ago still has me wanting to own one prior to buying a 3D printer. I worked for a small engineering prototyping shop. I used a large Epilog Laser, and used it personally to cut centering rings and fins, and also lots of other materials like acrylic, poster board, and leather, for work. My only regret is not making a LOT more centering rings before I retired!
I recently bought 3D printed fins from Boyce Aerospace for an old Estes Maxi Honest John. They required very little sanding, prior to priming. I have not completed the build, I still must build the launch lug carriers. But the look and fit is so much better than the vacuformed fins. I think my choice of laser over 3D printer is that I tend to make parts from wood when possible, and will likely keep buying commercially available 3D parts for detailed parts. I have used CNC for cutting wood, but laser is still my preferred tool for things like centering rings and fins. I also have a wood lathe and enjoy turning nose cones, transitions, nose blocks, and tail cones or engine nacelles.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B In the Paint Shop: Launch-Ready:KFD Mini Satellite Interceptor |
#4
|
|||
|
|||
I am planning to clone a bunch of centuri kits, most of the instructions I got from jimz , centuri used .05 fiber board. Did they always use .05 for all models? Does anyone think I might have any issues replacing with 1/16" plywood ?
Reason in posting here I am cutting all of these with my newly aquire atomstack r7. I have already made alot of centering rings, and oddball centering rings, baffles for bt20,50,55 and 60. I have also clone d a Rocketarium Rebel, in 1/16 plywood. |
#5
|
||||
|
||||
Every Centuri kit I ever built using fibreboard fins were the same thickness.
1/32 plywood would be stronger. 1/16 ply I would expect to be much heavier and way overkill.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC ! |
#6
|
|||
|
|||
1/16 balsa or bass wood should be fine.
|
#7
|
|||
|
|||
I know this is an old post, but no one ever gave recommendations. I have what is now called Omtech laser. It?s Chinese, but was what was affordable at the time at around $1700. It?s 20x24 and has done a fine job with little trouble. It?s big though and uses Lightburn software which is really a breeze to run. All of the qualities that were wanted in the first post would put you at probably $15,000 minimum. Not sure there are any American made machines under 15,000. I know epilog has tried to get a lower cost machine, but not sure if they have. A really promising machine is the Thunder Bolt RF laser. RF lasers don?t need water cooled. I?ve watched several videos on this machine and it looks good. Still, it?s $5000. With any of the Chinese lasers you want one with a Ruida controller. This is what talks to Lightburn and makes them much easier to run.
__________________
Rick Randol NAR #28062, ROCI Section #625 http://www.indyrockets.org NewWay Space Models-We Cornered Model Rocketry |
#8
|
||||
|
||||
Glowforge
__________________
Chris Halinaty My Flight Statistics for the Past Year
|
#9
|
|||
|
|||
My 2 cents on Glowforge. I have 2 good friends that each have Glowforge machines. They can only cut material up to 1/4? thick which is great for centering rings and fins, but if you have a desire to cut fin slots on tubes or other thicker projects, you can?t. The real problem is that the machine is cloud based, if your internet goes down or is spotty, you can?t use it. It?s just a multi thousand dollar paper weight. I saw it happen in person at a Glowforge equipment show where they were showing the machine to potential customers and the machine never connected to the internet, thus showing how it didn?t work. My friends make thin wood craft items, but I would never recommend a Glowforge. Your mileage may vary.
__________________
Rick Randol NAR #28062, ROCI Section #625 http://www.indyrockets.org NewWay Space Models-We Cornered Model Rocketry |
#10
|
|||
|
|||
Just wanted to show a few fin things I've made in the first week of] operation
|
Thread Tools | Search this Thread |
Display Modes | |
|
|