#1
|
||||
|
||||
Picked up a Vintage NOS Xacto #89 tool cabinet
Picked up a Vintage Xacto #89 tool cabinet on ebay.
Filled with NOS tools that are pristine. A particular seller refurbishes them. This is the large two-panel set that has most of the important Xacto tools. Xacto only made one larger set, the three panel #99. Several blades in the set I never even knew existed and were discontinued by the mid 70's. Will post pics soon.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC ! Last edited by ghrocketman : 05-22-2020 at 06:11 PM. |
#2
|
|||
|
|||
Quote:
Nice find. I remember the large two-panel sets.
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#3
|
||||
|
||||
I don't know what the model number is, but this is the XACTO set I've used for the last 35+ years. Most of the blades are original. Some are long gone. For me, the mahogany sanding block is the most useful tool in the box.
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#4
|
||||
|
||||
Jeffy-
That set is the #86, Standard Craft Knife Set. The #86 set is the first full Xacto set I got. Think probably around 1982. I still have that set along with 4 other Xacto sets/chests. Before that I just used a #1 knife with #11 blades and a #5 red handle with a razor saw for all my R/C and Rocketry construction.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC ! |
#5
|
||||
|
||||
Here's a pic of the #89 Xacto set I just acquired along with a pic of two other vintage sets.
The one with the clear sliding top is an old #86 before they came in a hinged box. The other one is a #5021 Deluxe Knife Set.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC ! |
#6
|
||||
|
||||
Wow! That #89 set is one lucky find!
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#7
|
||||
|
||||
The seller on ebay gets the cabinets then restocks them with vintage NOS Xacto pieces.
I think the last year Xacto offered this set, the 3-panel larger #99, and the smaller #88N Hobby Den was somewhere around 1981. The #89 set pictured here was the 2nd largest set offered by Xacto.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC ! |
#8
|
||||
|
||||
Quote:
Yeah, GH, that is quite the knife and tool set! Man, I'd have keeled over dead if I had been able to get a set like that as a kid. Heck, I'd keeled over if I just got the standard little three knife set. I started off with the Xacto #8, which is that 'clamshell halves' knife that pivoted at the center of the handle so you could insert/remove the blade. It cost about $.30. I had that for a couple years as a kid then finally got the good 'ol Xacto #1, which I still have and still use. I used those two for quite a number of years. Later on one could get all kind of Xacto knockoff knife sets for super cheap, and I have picked up a number of those over the years and they have worked just fine. But that is a prize set you got there, GH. Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#9
|
||||
|
||||
It's a really neat set. Would have loved to have a set this complete back when I first got into RC Airplanes and Rocketry back in 1977.
I missed out on a Xacto #99 three-panel Super set about 2mos ago on ebay. It went for somewhere around $400.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC ! |
#10
|
|||
|
|||
I just re-did our Hobby-Craft room and can now hang my Hobby-Den over my workbench. I picked this up on Ebay about 2 1/2 years ago.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|