|
#1
|
||||
|
||||
Working on A Honest John
Working on a little project I have. You'll soon see.
Mike Last edited by mbauer : 09-12-2021 at 08:40 AM. |
#2
|
||||
|
||||
Can anyone please tell me the outside diameter in inches of the C size engine mount, and the D size? Need to adjust the internal tube so that either can be fitted.
Mike |
#3
|
|||
|
|||
Quote:
Hi. Not sure which kit version you’re working on here. The BT-60 kit simply uses a standard 24Mm mount, or the OD of the BT is 1.637. Not sure of ID. Length can vary depending on using D or E engine. The others are from the BT-50 tube and 0.976 OD. ,,, or 18MM standard engine mount. Does this help ? I’ve modified Many types of engine mounts,, even using outside engine hooks to convert a Scrambler from a 3 Engine 18 MM cluster to a single D 24 Mm mount,,, ( think I still have it !). Perhaps I can be of further help. Let me know. Dan. PS, yup, here it is....pics coming. Just for fun...... Here’s pics. I built this in the early 70s, modified it later. Used makeshift parts.
__________________
ENGINE COSTS ARE " OUT OF SIGHT " ..... |
#4
|
||||
|
||||
Quote:
It does for the BT-60. In my old stash found some BT-50. Thank you for the information. Getting ready to add a letter size Honest john that when built will be approx: 30" tall, based on the BT-50. Mike |
#5
|
||||
|
||||
1st Try Designing C-Size Rocket 4th of July Colors
This is my first attempt at converting a stomp rocket to an Estes size C engine.
I've printed one and plan to post photos as I build it. PDF file attached for the rocket, be sure to print at 100% or full size to get it to fit properly. You can substitute a BT-50 tube for the internal cardstock tube; remember to mark for the former bulkhead locations. Use Index 110 lb [198.9 gsm] cardstock only! Honest John is painted in 4th of July colors. Didn't think of this until late in the day on the 4th. Just save the PDF to your computer. Rocket when built will be 30" tall. Will need to use 3/32" basswood for the stabilizer fin pattern provided. PDF conversion from AutoCAD to PDF changed color of Red And Blue, they should be darker...I'll work on that. Mike Last edited by mbauer : 07-06-2020 at 01:27 AM. |
#6
|
|||
|
|||
Fins
Quote:
I always skin my fins. I used a single balsa fin, instead of 3 as per Estes design on BT-60 HJ. Worked and looks great.
__________________
ENGINE COSTS ARE " OUT OF SIGHT " ..... |
#7
|
|||
|
|||
You’re welcome. Contact me any time. Glad to help. Dan.
__________________
ENGINE COSTS ARE " OUT OF SIGHT " ..... |
#8
|
||||
|
||||
Cardstock Honest John Build Construction Photos/Sequence
Hello Everyone,
I took several photos while building the Honest John with the 4th of July colors. The PDF drawing posted above has a few graphic errors that will be fixed, once this series of build photos have been posted. Main issue is the 7-red stripes on the fuselage. At the glue seam two are combined into one. This makes them look wider, tried a couple of different options, but ended up too many white stripes. Decide I will create a gold colored border to split them. Part fit is good so not going to need any changes for the pieces. Below is the first construction photo. Has a few of the tools, parts after cutting them out, and the balsa fins. The original PDF says to use 3/32" Balsa, this has been changed to 1/16" for the construction. The outer covering of cardstock gives the combination lots of strength. So, 1/16" thick will work! Please note in the photo on the far left there is a view of my empressor that is used to score fold lines, it has a small ball on the end. You can use the back edge of a kitchen butter knife, or go to an Art Supply store and buy an Art Embosser with a wood handle and balls at the ends. Fiskars has something similar you can sometimes find at Walmart This rocket is 39" tall instead of the 30" in the PDF above, it needs printed on 11x17 size cardstock. I shrank it down to the 30" so it would fit the letter size 8.5"x11" cardstock that is available at the big box stores. |
#9
|
||||
|
||||
Quote:
The "C" sized mount tube is BT-20 . . . It is .736", outside diameter. The "D" sized mount tube is BT-50 . . . It is .976", outside diameter. Dave F. |
#10
|
||||
|
||||
Your model reminds me of this HoJo display . . . I nicknamed it "Bomb Pop" - LOL !
Dave F. |
Thread Tools | Search this Thread |
Display Modes | |
|
|