#1
|
||||
|
||||
SAROS parts
Carl,
Do you have the balsa equivalents for those Estes SAROS parts in your catalog? I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match? Fins?
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
Quote:
He's definitely got the nose and reducer. the fin can can be reduced to just a couple of shrouds and the fins are an inch in span (maybe a inch and an eighth), the root is probably an inch and a quarter, and the tip is 3/4" with the trailing edge square.
__________________
Roy nar12605 |
#3
|
||||
|
||||
It's who you know "on the inside"...
Quote:
http://www.semroc.com/Store/Scripts...?idproduct=1048 TA-2050 http://www.semroc.com/Store/Scripts...p?idproduct=829 Fins should probably be 1/16" balsa. Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#4
|
||||
|
||||
Thanks, guys! I thought Carl had already put these into his alien contraption, but I couldn't remember the part numbers.
So I guess I no longer have an excuse for not building one...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#5
|
||||
|
||||
The Saros also had formed wraps, didn't it?
__________________
Mark S. Kulka NAR #86134 L1,_ASTRE #471_Adirondack Mountains, NY
Opinions Unfettered by Logic • Advice Unsullied by Erudition • Rocketry Without Pity
|
Thread Tools | Search this Thread |
Display Modes | |
|
|