Thread: Gary Larsen's Farside Rocket... Semi-Scale
View Single Post
  #10  
Old 03-11-2024, 05:15 PM
HenryMac's Avatar
HenryMac HenryMac is offline
When In Doubt, Build Hell-For-Stout
  
Join Date: Feb 2020
Location: Central Colorado
Posts: 407
Default
Nose Cone Hub

I turned the nose cone hub from a scrap piece of a Southern Yellow Pine 4 x 4. Then cut the 22-1/2 degree angle with my chop saw, and drilled the 1" dia. hole.​
​
I mocked up the upper tubes and the cone hub to check the fit.​
Attached Thumbnails
Click image for larger version Name: 001.JPG Views: 9 Size: 171.3 KB  Click image for larger version Name: 002.JPG Views: 9 Size: 200.6 KB  Click image for larger version Name: 003.JPG Views: 12 Size: 185.4 KB  
__________________
John Simmons a.k.a. "Lakeroadster"
NAR 113985
My Fleet with Build Data: Lakeroadster's Rocket Shop
Reply With Quote